Configuring Dual Hd Displays With Hdmi And Displayport - cable matters 107008 User Manual

4.3 Configuring Dual HD Displays with HDMI and DisplayPort

Displays Type
1 HDMI
1 DisplayPort
2 HDMI + DisplayPort
1) Select the HDMI and DisplayPort video input from the connected display menus
2) Open the Intel HD Graphics Control Panel from the Windows search bar
Select Multiple Displays to chose to Clone or Extend the displays
•
Select General Settings to change Resolution, Refresh Rate, and Scaling
•
Select Apply when finished. Select Save Profile to remember these settings.
•
3) Configure the audio from the Sound menu in the Windows Control Panel
Locate the connected display and select Set Default
Notes:
Displays can be connected either wirelessly or through USB-C
•
HDCP IS NOT supported wirelessly by the Dock for viewing protected video content
•
HDCP IS supported over USB-C with the Dock
•
A USB-C computer has priority to the displays once it is connected to a host computer
•
60 GHz Wireless Dock Hybrid Model with USB-C
Max Resolution
2560x1600@60Hz
2560x1600@60Hz
1920x1200@60Hz
www.cablematters.com
10
INTEL HD Graphics
DOCK_XXX
Audio