Sharp MD-MT877H Operation Manual page 45

Titling a MiniDisc : continued
To add characters
1
Put the unit in the character input mode.
(Perform steps 1 - 2 on page 43.)
2
Press the VOL + or VOL – button to move the
cursor to the right of the character, where you
want to add a new character.
3
Select the character to add.
(Perform steps 3 - 4 on page 43.)
4
Press the ENTER button.
5
Press the EDIT button.
6
TOC will be displayed to write the updated
contents to the MiniDisc press the •
button.
You cannot remove the MiniDisc whilst TOC is
displayed. TOC will not disappear until the re-
corded contents have been updated.
Web-site: www.sharp.co.uk/support
/ :OFF
Help Line: 08705 274277 (office hours)
45