Table of Contents
Advertisement
Titling a MiniDisc
Creating disc and track names
Load a MiniDisc to be named. A Playback-only or record-
ing-prevented MiniDisc cannot be edited.
1
Disc name
Whilst in the pause
Whilst in the pause
mode with "DISC" dis-
mode, press the EDIT
played, press the EDIT
button repeatedly to
button repeatedly to
select "TRACK NAME".
select "DISC NAME".
If "DISC" is not dis-
played, you cannot se-
lect "DISC NAME."
"DISC" is displayed
when the •
/:OFF is
pressed once.
2
Press the ENTER button.
Cursor
The unit will enter the character input mode.
The MiniDisc lid will be locked, to cancel the
operation, press the •
/ :OFF button.
3
Press the DISP button repeatedly to select
the type of characters.
Track name
(Capital letters) (Lower-case letters) (Numbers and symbols)
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
4
Press the 5
select the letter.
5
Press the ENTER button to enter it.
Position where the next letter will be entered
6
To enter more letters, repeat steps 3 - 5.
Web-site: www.sharp.co.uk/support
5 or 4
4 button repeatedly to
5
5
4
4
5
4
Continued to the next page
Help Line: 08705 274277 (office hours)
43
Advertisement
Table of Contents
Troubleshooting
