Sharp 27N S50 Operation Manual page 28

Set Up (Continued)
L
Saving broadcast TV channels into memory.
1.1
Press MENU to access MAIN MENU
screen, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the " " mark to "SET
UP".
1.2
Press VOL (+) or (–) to access SET UP
mode, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the " " mark to "CH
SETTING".
1.3
Press VOL (+) or (–) to access CH
SETTING mode.
1.4
Press CH UP ( 8 ) or DOWN ( 9 ) to move
the " " mark to "CH SEARCH", then press
VOL (+) or (–) to access CH SEARCH
mode.
START
2.1
Press VOL (+) . The tuner will search
through all available channels in your area
and add them into the TV's memory.
STOP
2.2
Press VOL (–) . CH SEARCH will stop at
the current channel and will not add any
higher channels.
2.3
Press MENU to exit.
L
Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1
Press MENU to access MAIN MENU
screen, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the " " mark to "SET
UP".
1.2
Press VOL (+) or (–) to access SET UP
mode, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the " " mark to "CH
SETTING".
1.3
Press VOL (+) or (–) to access CH
SETTING mode, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the " " mark to "CH
MEMORY".
2.1
Press VOL (+) or (–) to access CH MEMORY.
2.2
Use CH UP ( 8 ) or DOWN ( 9 ) or REMOTE
KEYPAD to select each desired channel
to add or erase.
2.3
Press VOL (+) to add a channel to the TV's
memory or press VOL (–) to erase a
channel from the TV's memory.
28
26-29 27N-S50
(STOP)
or
28
(CH SETTING mode)
(START)
(CH SEARCH mode)
(CH SETTING mode)
6/1/00, 11:44 AM