Central Pneumatic 66801 Set Up And Operating Instructions Manual page 16

Industrial hvlp paint spray system with digital gauge
Table of Contents

Advertisement

ImPOrtant: clean the spray gun ImmedIately after use.
Improper cleaning will cause the spray gun not to work properly.
materials dry quickly which will render the gun useless.
It is extremely difficult to remove dry paint from small passages within the Gun.
threaded connections prior to storing
the unit.
solution disposal
After cleaning your Spray Gun, prop-
erly dispose of your cleaning solu-
tions according to the solution manu-
facturer's directions and local hazard-
ous waste standards.
daily - air supply maintenance
Every day, perform maintenance on
the air supply according to the com-
ponent manufacturers' instructions.
changing the digital display batteries
To change the batteries of the Digital
Display:
a.
Unscrew the Battery Cover on the
back of the Handle, behind the Digi-
tal Display.
b.
Remove the old batteries.
c.
Replace with two new batteries
(LR54 1.5V - included) with the posi-
tive side facing you as you install the
batteries.
d.
Replace the Battery Cover.
caution! do not use the paint
sprayer if the digital display is
broken or damaged. Have the tool
serviced by a qualified technician.
For technical questions, please call 1-800-444-3353;
SKU 66801
troubleshooting section near the end of manual.
Page 16

Advertisement

Table of Contents
loading

Table of Contents