HP 8712ET User Manual Supplement page 35

By selecting
SYSTEM OPTIONS
User TTL Config Softkey Auto-Step
through the user-defined
connected to the USER TTL IN/OUT rear panel connector. See
Switch with User BEGIN" on page 3-11
Selecting the User BEGIN
by a sequence of IBASIC commands defined within an IBASIC program.
IBASIC programs to be used for
structure:
10 !The following label must be present.
20 User_begin: !
30 ...
40 ! Define softkey labels
50 OUTPUT @871X;"DISP:MENU2:KEY1 'Test Setup 1';*WAI"
60 OUTPUT @871X;"DISP:MENU2:KEY2 'Test Setup 2';*WAI"
70 OUTPUT @871X;"DISP:MENU2:KEY3 'Save Results';*WAI"
80 OUTPUT @871X;"DISP:MENU2:KEY4 'Print Results 4';*WAI"
100 User_pause: PAUSE
110 GOTO User_pause
120 !The following key labels must be present.
140 User_key1: !Insert code for softkey 1 here
150 GOTO User_pause
160 User_key2: !Insert code for softkey 2 here
170 GOTO User_pause
...
200 User_key7: !Insert code for softkey 7 here
210 GOTO User_pause
Automating Measurements
System Config
, you can automatically step
menu keys by use of a switch
BEGIN
for more information.
softkey will run a macro function defined
User BEGIN
Operator Interaction
User-Defined BEGIN Key Menu
"Using a
must have the following
DO NOT REMOVE
DO NOT REMOVE
3-7