<Response format in Advanced operation >
■ Normal response
• Response when no ID number has been set
Carriage return code
(0D
O
K
• Response when an ID number has been set
Space (20
O
K
SPC 0
ID number of responding monitor
■ When a command has not been executed correctly*
• Response when no ID number has been set
E
R
R
• Response when an ID number has been set
E
R
R
SPC 0
* This is returned when there is no such command, or when the command cannot be used in the current state of
the monitor (i.e. video auto-adjustment with video display).
* If communication has not been established for reasons like a bad connection with the monitor, nothing is returned
(not even ERR).
* If no monitor has been assigned the designated ID number (e.g. if the command IDSL0002
monitor with ID=002 is found), no response is returned.
, 0A
)
H
H
)
Carriage return code
H
(0D
, 0A
H
0
1
Carriage return code
(0D
, 0A
)
H
H
Carriage return code
Space (20
)
H
(0D
0
1
ID number
A response is returned when execution of the
pertinent command is finished.
)
H
, 0A
)
H
H
is used, but no
45
E