Driver Assistance Systems - GMC Canyon 2019 Quick Reference Manual

DRIVER ASSISTANCE SYSTEMS

Safety or driver assistance features are no substitute for the driver's responsibility to operate
the vehicle in a safe manner. The driver should remain attentive to traffic, surroundings and
road conditions at all times. Read your Owner's Manual for important feature limitations and
information.
Forward Collision Alert
cluster when a vehicle is detected and is amber when following a vehicle ahead much
too closely. When approaching a vehicle directly ahead too rapidly, a red alert flashes
on the windshield and rapid beeps sound.
Press the
alert timing to Far, Medium, Near, or Off. The setting is displayed on the Driver
Information Center.
Lane Departure Warning
turn signal in that direction, the system flashes an amber
ment cluster and beeps sound on the left or right side of the vehicle.
Press the Lane Departure Warning button on the center of the instrument panel
to turn the system on or off.
Rear Vision Camera – When the vehicle is in Reverse, a view of the area behind the
vehicle displays on the infotainment system. Vehicle speed must be below 8 mph.
To turn the guidance lines on or off, touch the Guidance Lines screen button.
Rear Park Assist
F
information is provided on the Driver Information Center. When an object is very
close, 5 beeps sound.
To turn Rear Park Assist on or off, go to Settings > Vehicle > Collision/Detection
Systems.
TRACTION CONTROL AND STABILITRAK SYSTEMS
The traction control system limits wheelspin and the StabiliTrak
system assists with directional control of the vehicle in difficult driving conditions.
Both systems turn on automatically every time the vehicle is started.
Turn off traction control if the vehicle is stuck and rocking the vehicle is required.
Press the Traction Control/StabiliTrak Off button on the center of the instrument
panel to turn traction control off or on. The
illuminate on the instrument cluster when the system is off.
INTEGRATED TRAILER BRAKE CONTROL (ITBC)
The ITBC system can be used to adjust the amount of power output, or Trailer Gain,
available to the trailer brakes. The control panel is located on the left side of the
instrument panel. ITBC information is displayed on the Driver Information Center.
Adjust the Trailer Gain by pressing the +/– adjustment buttons on the control panel.
Squeeze the levers together on the control panel (left lever does not move) to
manually apply the trailer brakes.
14
Optional equipment
F
– The
F
Collision Alert button on the left side of the steering wheel to set the
– When crossing a detected lane marking, without using a
F
– During low-speed parking maneuvers, "distance to closest object"
Vehicle Ahead indicator is green on the instrument
See Driving and Operating in your Owner's Manual.
Traction Control Off light will
See Driving and Operating in your Owner's Manual.
See Driving and Operating in your Owner's Manual.
indicator on the instru-
®
stability control
F