Samsung SGH-J200 Service Manual
Samsung SGH-J200 Service Manual

Samsung SGH-J200 Service Manual

Gsm telephone
Hide thumbs Also See for SGH-J200:

Advertisement

Advertisement

Table of Contents
loading

Summary of Contents for Samsung SGH-J200

  • Page 1: Table Of Contents

    GSM TELEPHONE SGH-J200 GSM TELEPHONE CONTENTS Safety Precautions Specification Product Function Array course control Exploded View and Parts list MAIN Electrical Parts List Block Diagrams PCB Diagrams Flow Chart of Troubleshooting 10. Reference data 11. Disassembly and Assembly Instructions...
  • Page 2 GSPN (Global Service Partner Network) Country North America Latin America Europe China Asia Mideast & Africa This Service Manual is a property of Samsung Electronics Co.,Ltd. Any unauthorized use of Manual can be punished under applicable International and/or domestic law. Web Site service.samsungportal.com latin.samsungportal.com...
  • Page 3: Safety Precautions

    1. Safety Precautions 1-1. Repair Precaution ● Repair in Shield Box, during detailed tuning. Take specially care of tuning or test, because specipicity of cellular phone is sensitive for surrounding interference(RF noise). ● Be careful to use a kind of magnetic object or tool, because performance of parts is damaged by the influence of magnetic force.
  • Page 4 S afety Precautions 1-2. ESD(Electrostatically Sensitive Devices) Precaution Several semiconductor may be damaged easily by static electricity. Such parts are called by ESD (Electrostatically Sensitive Devices), for example IC,BGA chip etc. Read Precaution below. You can prevent from ESD damage by static electricity. ●...
  • Page 5: Specification

    2. Specification 2-1. GSM & WCDMA General Specification EG SM 9 00 Fr eq. 8 80~915 Band[MHz] 9 25~960 Uplin k/Down link 0~124 & ARF CN ra nge 97 5~1023 T x/Rx spacing 45MHz Mo d. Bit r ate/ 270 .833kb ps Bit Period 3 .692u s Ti me Slo t...
  • Page 6: Gsm Tx Power Class

    Speclflcation 2-2. GSM Tx Power Class TX Power GSM900 control level 33±2 dBm 31±2 dBm 29±2 dBm 27±2 dBm 25±2 dBm 23±2 dBm 21±2 dBm 19±2 dBm 17±2 dBm 15±2 dBm 13±2 dBm 11±3 dBm 9±3dBm 7±3 dBm 5±3 dBm TX Power DCS1800 control level...
  • Page 7: Product Function

    3. Product Function Main Function ― Built-in Digital Cameras( CMOS 1.3 Mega , CMOS VGA ) ― 1.76" Main LCD ( 260K TFT ) ― Video Telephony / Streaming ― Bluetooth V2.0 Wireless Technology ― USB 2.0 ― MP3 player ―...
  • Page 8 Product Function SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 9: Array Course Control

    4. Array course control 4-1. Software Adjustments GH80-03308A GH39-00890A GH39-00859B 1. JIG: Download, Trace, Calibration, etc 2. RF test cable: RF test 3. Test cable: JIG to phone 4. TA (Travel Adaptor) 5. Data Link Cable : USB cable 6. Serial cable: PC to JIG SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization GH39-00397A...
  • Page 10: Software Downloading

    – FactoryFS_J200_Generic.ffs : Default file system to be put into in initial production 4-2-2. Pre-requsite for Downloading • Downloader Program( MultiLoader V5.32.exe ) • SGH-J200 Mobile Phone • USB Data Link Cable • Binary files SAMSUNG Proprietary-Contents may change without notice...
  • Page 11 4-2-3. S/W Downloader Program 1. Boot the J200 by pressing ‘Power ON key’ + ‘Number 9 key’ at the same time- If you do properly, you can see the following message on LCD “DOWNLOAD” or RED SCREEN 2. Load the binary download program by executing the then Check the 6245.
  • Page 12 Array course control 4. Select the binary file what you want to download SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 13 Array course control 5. Now press the button ‘Port Search’ 6. Now press the button ‘Download’ 7. When downloading is complete, UE reboot automatically. - If there is difference in FactoryFs.bin, UE will format file system automatically. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 14: Exploded View And Parts List

    5. Exploded View and Parts List 5-1. Cellular phone Exploded View QMW02 QFR01 QCA02 QLC01 QCA01 QBR04 QSP01 QMO01 QRE01 QCR76 QBA01 QBA00 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization QIF01 QCK01 QVO01 QSD01 QKP01...
  • Page 15: Cellular Phone Parts List

    Exploded View and Parts List 5-2. Cellular phone Parts List Design LOC QAN02 QAN05 QBA00 QBA01 INNER BATTERY PACK-880MAH , BL QBR04 QCA01 QCA02 QCK01 QCR76 QFR01 QIF01 QJK01 QKP01 QLC01 QME01 DOME SHEET-J200 DOMESHEET 17KE QMI01 QMI03 QMO01 QMP01 QMW02 QRE01 QRF01...
  • Page 16 Description SCREW-TAPPING ADAPTOR-ATADS10EBE,BLK,EU EARPHONE-EARPHONE, BLK,S20P,A VINYL-BOHO MAIN WINDOW LABEL(R)-WATER SOAK TAPE-CAMERA INSU TAPE-PCB1 TAPE-PCB2 SPONGE-NAVI VINYL-BOHO FRONT VINYL-BOHO WINDOW SCREW-TAPPING BAG PE LABEL(P)-UNIT SEAL LABEL(R)-MAIN(EU) CUSHION-CASE(EU) BOX-UNIT(EU) MANUAL USERS-EU SPANISH SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Exploded View and Parts List SEC CODE 6002-001409...
  • Page 17 Exploded View and Parts List SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 18: Main Electrical Parts List

    6. Main Electrical Parts List Design LOC ANT100 NPR-ANTENNA CONTACT V2 ANT101 NPR-ANTENNA CONTACT V2 ANT102 BAT400 BT100 BTC700 C100 C101 C102 C103 C104 C105 C106 C107 C108 C109 C113 C114 C115 C116 C117 C118 C119 C120 C121 C122 C123 C124 C125 C126...
  • Page 19 Main Electrical Parts List Design LOC C153 C154 C155 C156 C157 C158 C159 C160 C161 C162 C163 C164 C165 C166 C167 C200 C201 C202 C203 C204 C205 C207 C208 C209 C210 C211 C212 C213 C214 C215 C216 C218 C219 C221 C302 C303 C304...
  • Page 20 Design LOC Description C324 C325 C326 C327 C328 C329 C330 C331 C332 C333 C334 C335 C336 C337 C338 C339 C340 C341 C342 C343 C344 C345 C346 C347 C348 C349 C350 C400 C401 C402 C403 C404 C405 C406 C407 C408 C409 C410 C411 C412...
  • Page 21 Main Electrical Parts List Design LOC C426 C427 C428 C429 C430 C431 C432 C433 C434 C435 C436 C437 C438 C439 C441 C442 C448 C449 C450 C451 C501 C502 C503 C504 C505 C506 C507 C509 C510 C512 C514 C515 C516 C517 C518 C519 C520...
  • Page 22 Design LOC Description C603 C606 C607 C608 C609 C610 C611 C612 C613 C614 C615 C616 C617 C618 C619 C620 C621 C622 C623 C624 C625 C626 C627 C628 C629 C630 C700 C701 C702 C703 C704 C705 C706 C707 C708 C709 C710 C711 C712 C713...
  • Page 23 Main Electrical Parts List Design LOC D500 D501 D601 D603 D700 D701 DUF100 DUX200 F100 F101 F102 F200 F300 F700 F701 F702 F703 F705 F707 IFC600 SOCKET-INTERFACE L101 L102 L103 L104 L105 L106 L109 L110 L111 L112 L114 L115 L116 L119 L121 L124...
  • Page 24 Design LOC Description LED802 LED803 LED804 LED805 LED806 LED807 LED808 LED809 LED810 LED811 LED812 LED813 LED814 LED815 LED816 OSC100 CRYSTAL-SMD OSC200 OSCILLATOR-VCTCXO OSC400 CRYSTAL-SMD PAM100 IC-POWER AMP PAM200 IC-POWER AMP Q200 Q400 R101 R102 R104 R105 R106 R107 R108 R109 R110 R111 R112...
  • Page 25 Main Electrical Parts List Design LOC R300 R301 R302 R303 R307 R311 R313 R316 R317 R318 R322 R323 R324 R325 R326 R328 R329 R330 R331 R332 R334 R335 R336 R400 R401 R402 R403 R404 R405 R406 R407 R408 R409 R411 R412 R413 R414...
  • Page 26 Design LOC Description R509 R510 R511 R512 R513 R514 R515 R517 R518 R519 R520 R521 R522 R523 R601 R602 R603 R604 R605 R606 R607 R608 R609 R610 R611 R612 R613 R614 R615 R616 R800 R801 R802 R803 R804 R805 R806 R807 R808 R809...
  • Page 27 Main Electrical Parts List Design LOC TA100 TA400 TAC800 TAC801 TAC802 U100 U302 IC-ANALOG SWITCH U400 IC-POWER SUPERVISOR U401 U500 U502 IC-ANALOG MULTIPLEX U503 IC-ANALOG MULTIPLEX U600 U601 U602 U603 IC-DC/DC CONVERTER U604 IC-POSI.FIXED REG. U605 U800 IC-ANALOG SWITCH U801 KEY FPCB-SGHJ200,JOG KEY U802 U803...
  • Page 30: Pcb Diagrams

    8. PCB Diagrams 8- 1...
  • Page 31 PCB Diagrams BOTTOM 8- 2...
  • Page 32: Flow Chart Of Troubleshooting

    9. Flow Chart of Troubleshooting 9-1. Power On ' Power On ' does not work Check the Battery Voltage is more than 3.5V U400 PIN57(PS_HOLD) = 2.6V? Check the Clock at OSC400=32.768KHZ? L401(VREG_MSMC) =1.2V? L401(VREG_MSME) = 1.8V? C418(VREG_MSMP) = 2.6V? C416(VREG_MSMA) = 2.6V? C408(VREG_TCXO) = 2.8V? Check for the clock at...
  • Page 33 Flow Chart of Troubleshooting Power On SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 34 Flow Chart of Troubleshooting 9-2. Initial Initial Failure PON_RESET_N ="H"? Check the circuit related to reset Not OK Is TP300~309 Check the circuit related to memory Check the circuit around LCD (short or unsolder) SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 35: Charging Part

    Flow Chart of Troubleshooting 9-3. Charging Part Abnormal charging part C606 = 5V ? U401 pin6 = "L"? Check the Battery & TA SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Resolder IFC600 Replace U401...
  • Page 36 Flow Chart of Troubleshooting SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 37: Sim Part

    Flow Chart of Troubleshooting 9-4. SIM Part Phone can't access SIM Card C442 = 'H' ? After Power ON, Check SIMCLK Signal on pin 15 of SIM 400 in a few second After SIM card insert, SIM400 pin 13 = "H" Check the SIM Card SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 38 Flow Chart of Troubleshooting SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 39 Flow Chart of Troubleshooting 9-5. Microphone Part - Phone MIC Microphone does not work Not OK Check the connection Resolder MIC from MIC Not OK Check the circuit from UCP300 to MIC Resolder the R507, R509, R513, R514 Not OK Check the MIC Replace the MIC SAMSUNG Proprietary-Contents may change without notice...
  • Page 40 Flow Chart of Troubleshooting SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 41 Flow Chart of Troubleshooting 9-6 Microphone Part - Earphone MIC Earphone mic. does not work Not OK Check the connection Resolder IFC600 pin 3,4 from IFC600 Check the circuit Not OK from IFC600 pin 3,4 Resolder L503, L504, C528, C532 to UCP300 Change a Earphone Is Earphone MIC working?
  • Page 42 Flow Chart of Troubleshooting 9-11 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 43: Earphone Part

    Flow Chart of Troubleshooting 9-7. Earphone Part Earphone does not work R512, R517 ≥ 100mV? (When MP3 file is played) U502 pin 16, 8 ≥ 100mV? (When MP3 file is played) U502 pin 16, 8 ≥ 200mV? (When MP3 file is played) Check the circuit from IFC600 pin 5, 6, 7 to U502...
  • Page 44 Flow Chart of Troubleshooting 9-13 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 45: Speaker Part

    Flow Chart of Troubleshooting 9-8. Speaker Part Speaker does not work Check the supply voltage of U500 Is the U503 =3.8V? Is the U500 output working? Check R503, R505 Check the signals of speaker input Is Speaker working? SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization No signal 9-14...
  • Page 46 Flow Chart of Troubleshooting 9-15 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 47: Key Data Input

    Flow Chart of Troubleshooting 9-9. Key Data Input Check Initial Operation When one of the main keys is pushed, is it displayed on LCD? When one of the Navi keys is pushed, dose it work well? SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Check the Dome sheet Check the Dome sheet and LCD FPCB...
  • Page 48: Lcd Part

    9-10. LCD part LCD does not work Backlight are ok? Pin 15 VLCD_2.8V is 2.8V? LCD is always Black? Replace the LCD Module SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Flow Chart of Troubleshooting Resolder LCD FPCB Resolder LCD FPCB Resolder LCD FPCB...
  • Page 49 Flow Chart of Troubleshooting 9-18 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 50: Camera Part

    9-11. Camera part "Camera" function does not work Check the Camera connector on board SLC700 pin 7, 19 = "H"? (for 1.3M) SLC701 Pin 1, 20 ="H"? (for VGA) Is there another problem? Replace the camera module SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization 9-19 Flow Chart of Troubleshooting...
  • Page 51 Flow Chart of Troubleshooting 9-20 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 52: Lcd Back Light

    Flow Chart of Troubleshooting 9-12. LCD Back Light Backlight does not work Is BACKLIGHT set Set BACKLIGHT on Always ON AlwaysON in the Menu? C627 ≥ 3.5V Replace or Resolder U603 U603 Pin 10, 11, 12 ='H'? Check UCP300, U603 Replace the LCD 9-21 SAMSUNG Proprietary-Contents may change without notice...
  • Page 53 Flow Chart of Troubleshooting 9-22 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 54: Key Back Light

    Flow Chart of Troubleshooting 9-13. Key Back Light Key Backlight does not work Is BACKLIGHT set Set BACKLIGHT on AlwaysON AlwaysON in the Menu? Replace or Resolder U600 VKEY_3.3V ≒ 3.3V? 9-23 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 55 Flow Chart of Troubleshooting 9-24 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 56: Gsm Receiver

    9-14. GSM Receiver RF input : CH center freq : +67.7kHz Amp : -50dBm >= -65dBm >= -68dBm 10, 11, 12, 13 Check U100 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization RX ON C105 Resolder RFS100,C105,L103 L117...
  • Page 57 Flow Chart of Troubleshooting 9-26 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 58: Gsm Transmitter

    9-15. GSM Transmitter TX ON (5 Level) >= -10dBm Check UCP300(MSM) SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization R117 >= -5dBm C152 F100 pin16 >= 25dBm C105 >= 25dBm 9-27 Flow Chart of Troubleshooting Check U100 Resolder F102 Resolder PAM100...
  • Page 59 Flow Chart of Troubleshooting 9-28 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 60: Dcs Receiver

    9-16. DCS Receiver RF input : CH center freq : +67.7kHz Amp : -50dBm >= -65dBm >= -68dBm 10, 11, 12, 13 Check U100 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization RX ON C105 Resolder RFS100,C105,L103 L113...
  • Page 61 Flow Chart of Troubleshooting 9-30 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 62: Dcs Transmitter

    9-17. DCS Transmitter TX ON (0 Level) Check UCP300(MSM) SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization R120 >= -5dBm F100 pin14 >= 25dBm C105 >= 25dBm 9-31 Flow Chart of Troubleshooting Check U100 Resolder PAM100 Resolder F100...
  • Page 63 Flow Chart of Troubleshooting 9-32 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 64: Pcs Receiver

    9-18. PCS Receiver RF input : CH center freq : +67.7kHz Amp : -50dBm >= -65dBm >= -68dBm 10, 11, 12, 13 Check U100 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization RX ON C105 Resolder RFS100,C105,L103 L107...
  • Page 65 Flow Chart of Troubleshooting 9-34 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 66: Pcs Transmitter

    9-19. PCS Transmitter TX ON (0 Level) Check UCP300(MSM) SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization R120 >= -5dBm F100 pin14 >= 25dBm C105 >= 25dBm 9-35 Flow Chart of Troubleshooting Check U100 Resolder PAM100 Resolder F100...
  • Page 67 Flow Chart of Troubleshooting 9-36 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 68: Wcdma Receiver

    9-20. WCDMA Receiver >= -65dBm >= -55dBm Check U100 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization RX ON C205 check and resolder DUX200 C129 L106, L112 >=-60dBm 9-37 Flow Chart of Troubleshooting Resolder U100 Resolder F101(SAW)
  • Page 69 Flow Chart of Troubleshooting 9-38 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 70: Wcdma Transmitter

    9-21. WCDMA Transmitter TX ON (PDM for 23dBm) Check UCP300(MSM) SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization F200 pin1 >= -10dBm L209 Resolder F200(W tx SAW) >= -10dBm C219 >= 15dBm C204 >= 15dBm C202 >= 15dBm...
  • Page 71 Flow Chart of Troubleshooting 9-40 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 72: Reference Data

    10. Reference data Reference Abbreviate ― AAC : Advanced Audio Coding. ― AVC : Advanced Video Coding. ― BER : Bit Error Rate ― BPSK : Binary Phase Shift Keying ― CA : Conditional Access ― CDM : Code Division Multiplexing ―...
  • Page 73 Reference data 10-2 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization...
  • Page 74: Disassembly And Assembly Instructions

    11. Disassembly and Assembly Instructions 11-1. Disassembly Instructions SCREW remove Remove SET SCREW 6 POINTs. (SILVER 1 POINT) MIC separation Separate MIC in SET.(When separate, keep in mind to MIC F-PCB's CRACK.) SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization REAR COVER separation Separate REAR COVER from FRONT.
  • Page 75 Disassembly and Assembly Instructions PBA separation Separate PBA ASS' Y from FRONT. Image that is parted PBA ASS' Y SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization KEY PAD exclusion Remove KEY PAD on FRONT. JOG KEY PAD separation Separate JOG KEY PAD from PBA ASS' Y.
  • Page 76 SMD SHIELD CAN separation Separate SMD SHIELD CAN from PBA ASS' Y. SPEAKER exclusion Separate SPEAKER from BRACKET. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Disassembly and Assembly Instructions MOTOR exclusion Separate MOTOR from BRACKET. 1.3MEGA CAMERA separation Separate 1.3 MEGA CAMERAs from BRACKET.
  • Page 77 Disassembly and Assembly Instructions BRACKET separation Separate BRACKET from PBA ASS' Y. 1.3MEGA CAMERA exclusion Remove 1.3 MEGA CAMERAs from PBA. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Anti-loose TAPE 1 exclusion loosing that stick on 1.3 MEGA CAMERA CONNECTORs Remove prevention TAPE.
  • Page 78 VGA CAMERA exclusion Remove VGA CAMERA from PBA. LCD SOLDERING PART exclusion Remove segment that become SOLDERING to PBA. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Disassembly and Assembly Instructions LCD MODULE exclusion Remove LCD MODULE from PBA.
  • Page 79 Disassembly and Assembly Instructions MOTOR exclusion Remove MOTOR that become SOLDERING on the PBA top portion. electric SPONGE 2 exclusion Remove TAPE that is attached to PBA left side middle. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization electric SPONGE 1 exclusion Remove TAPE that is attached to PBA right side middle.
  • Page 80: Assembly Instructions

    11-2. Assembly Instructions 3*4 KEY DOME SHEET attachment Attach 3*4 KEY DOME SHEET from PBA. electric SPONGE 2 attachment Attach TAPE at PBA left side middle. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Disassembly and Assembly Instructions electric SPONGE 1 attachment Attach TAPE at PBA left side middle.
  • Page 81 Disassembly and Assembly Instructions SPEAKER SOLDERING Do SPEAKER SOLDERING on the PBA top portion. LCD MODULE SOLDERING preparation LCD MODULE sets LCD F-PCB to right and left side HOLE before do SOLDERING. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization MIC SOLDERING Do MIC SOLDERING on PBA lower column.
  • Page 82 LCD MODULE attachment Attach LCD MODULE that become SOLDERING to PBA. VGA CAMERA Combination Combine VGA CAMERA to PBA's left side CONNECTOR. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Disassembly and Assembly Instructions State that LCD MODULE attaches Anti-loose TAPE 1 attachment Attach anti-loose TAPE on VGA CAMERA CONNETOR.
  • Page 83 Disassembly and Assembly Instructions 1.3MEGA CAMERA Combination Combine 1.3 MEGA CAMERAs to PBA's right side CONNECTOR. BRACKET assembly Assemble BRACKET to PBA. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Anti-loose TAPE 2 attachment Attach anti-loose TAPE on 1.3 MEGA CAMERA CONNETORs.
  • Page 84 VGA CAMERA assembly Assemble VGA CAMERA to BRACKET of the LCD MUDULE top portion. MOTOR Combination Combine MOTOR to BRAKCKET, like picture. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Disassembly and Assembly Instructions SPEAKER Combination Combine SPEAKER to BRACKET.
  • Page 85 Disassembly and Assembly Instructions SHIELD CAN 2 Combination Combine SHIELD CAN in PBA left side lower part. MIC HOLDER Combination Combine HOLDER to MIC with picture. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization JOG KEY PAD Combination Combine JOG KEY PAD with picture.
  • Page 86 3*4 KEY PAD Combination Combine 3*4 KEY PAD to FRONT. FRONT HOOK check Keep in mind PBA ASS' Y to HOOK when combine to FRONT. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization Disassembly and Assembly Instructions PBA ASS' Y Combination Combine PBA ASS' Y to FRONT .
  • Page 87 Disassembly and Assembly Instructions MAIN WINDOW attachment Attach MAIN WINDOW to FRONT COVER. SET assembly When assemble SET, assemble over downward. SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization REAR COVER assembly Assemble REAR COVER to FRONT COVER, like picture. SCREW Combination Tighten SCREW 6 POINTs to SET.

Table of Contents