Section 17: Changing Your Sound Settings
This section shows you how to customize your phone's audio
properties, such as ringers, keypad tones, alerts, shut down
sounds, and more.
Accessing the Sounds Menu
To access the Sounds menu, do the following:
In Standby mode, press Menu (
1.
The Sounds menu appears in the display.
Tip: To launch the Sounds menu using a voice command — In Standby
mode, press and hold
Say "Go to Sounds" into the microphone.
Select the desired sub-menu. The following sections
2.
describe the Sounds sub-menus in greater detail.
Master Volume
Use the Master Volume sub-menu to set the default volume for
incoming calls and alarms.
From the Sound s menu, select Master Volume. The
1.
current Master Volume setting appears in the display.
117
), then select Sounds.
until the phone prompts, "Say a command."
Use the Navigation key or the Volume key (on the left side
2.
of your phone) to change the volume level (Silence All,
Vibrate, Low, Low/Medium, Medium, Medium/High,
High).
Tip: To preview the current ringtone while adjusting the Master Volume
setting, press the Play soft key.
To add vibration to the Master Volume settings Low, Low/
3.
Medium, Medium, Medium/High, and High, press the
Vib. on soft key.
4.
Press SET (
) to save the volume level/vibrate mode.
Ringer Type
You can assign ring tones for calls and other alerts in the Ringer
Type sub menu.
From the Sounds menu, select Ringer Type. The following
1.
Ringer Types appear in the display: