Ohp System P - Sharp EL-9400 Operation Manual

O
HP System
Use the EL-9450/9400 OHP system with the overhead projector to make classroom
presentations convenient for the whole class to see.
EL-945T/94T (OHP system)
OHP Projection Panel
Procedure
Switch off the OHP Panel Controller.
1
Plug the cable connector of the OHP Projection Panel straight into the connection terminal of the
2
OHP Panel Controller.
(The optional AC adaptor is recommended for extended use of the OHP Projection Panel.)
Switch on the OHP Panel Controller.
3
Operating the OHP Panel Controller.
4
The OHP Projection Panel display is synchronized with the display of the OHP Panel Controller.
Place the OHP Projection Panel on top of the overhead projector to project images onto the screen.
Turn on the power to the overhead projector.
5
AC adaptor (optional)
OHP Panel
Controller
CE-450L
The CE-450L is included
for separate use
(see page 15)
16