Sony CCU-TX7P Operating Instructions Manual page 10

Location and Function of Parts
Camera operation unit switches and knobs
1 OUTPUT switch
2 OPERATE switch
3 SHUTTER setting
section
4 WHITE/BLACK BALANCE
control section
5 KNEE switch
6 MASTER BLACK knob
The camera operation unit's switches and knobs are
used to set and adjust video camera functions.
For details about the video camera functions and settings,
refer to operating instructions for your video camera.
1 OUTPUT switch
Use this switch to select the video to be output from
this unit.
CAM: Image being shot via video camera
BARS: Color bars generated by this unit
10
OPERATE OUTPUT GAIN
LOCK
HIGH
CAM
PART
MID
BARS
FULL
LOW
SHUTTER
SKIN
DETAIL
Hz
C.SCAN
ON
ON
OFF
OFF
WHITE/BLACK BALANCE
ATW
AUTO WHITE AUTO
PRE
MANUAL BLACK MANUAL
BLACK WHITE
KNEE
MASTER IRIS
BLACK
AUTO AUTO
PRESET MANUAL
2 OPERATE (operation range setting) switch
Use this switch to set the operation range of the
camera operation unit.
LOCK: This setting disables all of the camera
operation unit's functions.
PART: This setting enables only the IRIS control
section and MASTER BLACK knob to be
operated.
FULL: This setting enables all of the camera
operation unit's functions to be used. Settings
changed while this switch was set to LOCK
become valid when this switch is set to FULL.
7 GAIN switch
TLCS
8 TLCS switch
M.GAMMA
9 M. GAMMA knob
0 SKIN DETAIL switch
DETAIL
!¡ DETAIL knob
ON
1 2 3 4
!£ DIP switch
!™ IRIS control section