VTech DS6251 User Manual page 69

2-line cordless answering system with smart call blocker
Hide thumbs Also See for DS6251:
Table of Contents

Advertisement

RJ11 jack should normally be used for
connecting to a single line and an RJ14
jack for two lines. See the installation
instructions in the user's manual.
The Ringer Equivalence Number (REN) is
used to determine how many devices you
may connect to your telephone line and
still have them ring when you are called.
The REN for this product is encoded as the
6th and 7th characters following the US: in
the product identifier (e.g., if ## is 03, the
REN is 0.3). In most, but not all areas, the
sum of all RENs should be five (5.0) or less.
For more information, please contact your
telephone service provider.
This equipment must not be used with
Party Lines. If you have specially wired
alarm dialing equipment connected to
your telephone line, ensure the connection
of this equipment does not disable your
alarm equipment. If you have questions
about what will disable alarm equipment,
consult your telephone service provider or
a qualified installer.
If this equipment is malfunctioning, it must
be unplugged from the modular jack until
the problem has been corrected. Repairs
to this telephone equipment can only be
made by the manufacturer or its authorized
agents. For repair procedures, follow the
instructions outlined under the Limited
warranty.
If this equipment is causing harm to the
telephone network, the telephone service
provider may temporarily discontinue
your telephone service. The telephone
service provider is required to notify you
before interrupting service. If advance
notice is not practical, you will be notified
as soon as possible. You will be given
the opportunity to correct the problem
and the telephone service provider is
required to inform you of your right to file
a complaint with the FCC. Your telephone
service provider may make changes in
its facilities, equipment, operation, or
procedures that could affect the proper
functioning of this product. The telephone
service provider is required to notify you if
such changes are planned.
If this product is equipped with a corded
or cordless handset, it is hearing aid
compatible.
If this product has memory dialing locations,
you may choose to store emergency
telephone numbers (e.g., police, fire,
medical) in these locations. If you do store
or test emergency numbers, please:
Remain on the line and briefly explain the
reason for the call before hanging up.
Perform such activities in off-peak hours,
such as early morning or late evening.
Industry Canada
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device
must accept any interference received,
including interference that may cause
undesired operation.
Privacy of communications may not be
ensured when using this telephone.
The term ''IC:'' before the certification/
registration number only signifies that the
Industry Canada technical specifications
were met.
The Ringer Equivalence Number (REN) for
this terminal equipment is 1.0. The REN
indicates the maximum number of devices
allowed to be connected to a telephone
interface. The termination of an interface
may consist of any combination of devices
subject only to the requirement that the
sum of the RENs of all the devices not
exceed five.
This product meets the applicable
Innovation, Science and Economic
Development Canada technical
specifications.
61

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds6251-2Ds6251-4Ds6251-3

Table of Contents