There are several options for adding
detergent.
TwinDos
Before using TwinDos for the first time
the display will show information about
the factory default settings for TwinDos.
The following will appear in the display:
UltraPhase 1+2 set for medium water
hardness level. Change in "Settings"/
"TwinDos"
Touch the sensor repeatedly until
until you have read all the rows of
text.
The OK sensor will light up.
Touch the OK sensor to confirm.
Miele 2 Phase system
UltraPhase 1 and UltraPhase 2 need to
be dispensed in different ratios
depending on the colour mix of the
laundry load.
Touch the Dos sensor.
For whites
Use the and sensors to select
the colour mix of the laundry and
confirm with the OK sensor.
UltraPhase 1 and UltraPhase 2 will be
dispensed accordingly.
Liquid detergent/Fabric conditioner
It is possible to use other types of liquid
detergent/fabric conditioner. Refillable
TwinDos containers (optional
accessories) are required for this.
The washing machine's electronic
settings need to be adjusted
accordingly. See "Settings - TwinDos".
Touch the Dos sensor.
Both agents
Confirm the option displayed with the
OK button or select another
detergent or fabric conditioner with
the and sensors.
Tip: The recommended detergent(s) is
shown in the display and marked with a
tick ().
The appropriate amount of detergent
and/or fabric conditioner for the
programme will now be dispensed.
Adding stain remover
There are two options for adding stain
remover in addition to using the
automatic dispensing system:
– Use the Booster cap
– Add stain remover to the
compartment.
5. Add detergent
29