Table of Contents
Advertisement
Before using for the first time
Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
The following message appears in the
display:
Open and run Cottons 90°C without
laundry
Touch the sensor repeatedly until
you have read all the rows of text.
The OK sensor will light up.
Confirm the message with the
OK sensor.
To do this the Cottons 90 °C must be
started without laundry and without
detergent.
No other programmes can be started
until calibration has been carried out.
Open the stopcock.
Turn the programme selector to
Cottons.
1:55
Press the Start/Stop button.
The calibration programme has started.
This will take approx. 2 hours.
At the end of the programme the
following message will be displayed:
Set up complete
20
90°C
1600
Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to
allow the drum to dry.
Switch the washing machine off with
the button.
Advertisement
Table of Contents
