Setting Up A Serial Device - Multitech MTC-LAT1 User Manual

USING CONNECTION MANAGER

Setting Up a Serial Device

1. Connect the serial device to the PC.
2. Navigate to Control Panel > Device Manager. Make note of the COM port number for the connected
device (in COM Ports).
Example: COM port is COM31.
3. In the Action drop-down menu, select Add legacy hardware to add a new device.
4. Navigate through Add Hardware Wizard.
a. Click Next on the Welcome page.
b. Select Install the hardware that I manually select from a list, then click Next.
c. Select Modems, then click Next.
d. Check Don't detect my modem; I will select it from a list, then click Next.
e. Select Have Disk, then click Next.
38
®
MultiConnect Cell MTC-LAT1 User Guide