Replacing The Battery Pack - Intermec PW40A Quick Start Manual

6. Push down the paper release lever and insert the paper
into the paper well with it resting in the paper rod clips.
7. Press the red button while the printer is on and it will
feed paper. You will need about 2 inches of paper coming
out of the mechanism.
8. Lower the cover while placing the extra paper though the
tear bar.
9. Latch Cover closed and tear off extra paper.

Replacing the Battery Pack

1. Open the cover and push the battery removal tabs away
while lifting the battery up. The battery pack fits very
tightly so it takes some effort to remove them.
2. Insert the new battery by putting the non contact area of
the battery in first and resting against the center battery
support posts.
3. Push down on the battery near the battery removal tabs.
Ensure that the battery is completely seated and tab fits
over the top of the battery.
4. Charge the new battery.
PW40A Printer Quick Start Guide
Paper Loading
11