TP-Link TL-WR850N User Manual page 77

1 ) If you see the message
usually because windows configuration utility is disabled or you are running another
wireless configuration tool to connect the wireless.
2 ) Exit the wireless configuration tool (the TP-Link Utility, for example).
3 ) Select and right click
Management window.
4 ) Expand Services and Applications
Configuration
5 ) Right click Wireless Zero
6 ) Change Startup type
Started. And then click OK.
If you can find other wireless network except your own, please follow the steps below:
• Check the WLAN LED indicator on your wireless router/modem.
• Make sure your computer/device is still in the range of your router/modem. Move closer if it is
currently too far away.
If you can find your wireless network but fail to connect, please follow the steps below:
• Authenticating problem/password mismatch:
1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless
network for the first time. This PIN number is different from the Wireless Password/
Network Security Key. Usually you can only find it on the label of your router.
2 ) If you cannot find the PIN or PIN failed, you may choose
key instead, and then type in the
3 ) If it continues to show note of
confirm the wireless password of your wireless router.
Note: Wireless Password/Network Security Key is case sensitive.
• Windows unable to connect to XXXX / Can not join this network / Taking longer than usual
to connect to this network:
Windows cannot configure this wireless
My Computer
in the Services list on the right side.
Configuration, and then select Properties.
to Automatic, click
Wireless Password/Network Security
Network Security Key
on Desktop, and select
> Services, and find and locate
Start and make sure the Service status is
Mismatch, it is suggested to
connection, this is
Manage to open Computer
Wireless Zero
Connecting using a security
Key.
74