TP-Link TL-WR850N User Manual page 73

192.168.0.1, the IP address of the extended router can be 192.168.0.2~192.168.0.254.
We take 192.168.0.2 as example.)
2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 ) Go to Wireless
2 ) Click Scan, locate the root router's SSID and click
TP-Link_2512 as example).
3 ) If the root router is set with a wireless password, you should enter the wireless password
of the root router.
4 ) Click Save.
4. Disable DHCP:
1 ) Go to DHCP, select Disable, and click Save.
Now you can go to
means WDS bridging is successfully built.
> Basic Settings and click
Status to check the WDS status. When the
Enable WDS .
Choose (Here we take
WDS status is Run, it
70