Dmx Linking; Signal Connections - Chauvet Maverick MK 2 Spot Quick Reference Manual

Maverick MK2 Spot QRG
Safety Notes
Contact
What Is
Included
AC Power
AC Plug
Replacing The
Fuse

DMX Linking

DMX Connection
Signal
Connections
Art-Net™
Connection
sACN Connection
·
ONLY use the handles or yoke to carry this product. Do not carry by the
moving head.
·
In the event of a serious operating problem, stop using immediately.
·
The maximum ambient temperature is 113 °F (45 °C). Do not operate this
product at higher temperatures.
Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico,
contact your distributor to request support or return a product. Visit
the end of this QRG for contact information.
·
Maverick MK2 Spot
·
Power Input Cord
This product has an auto-ranging power supply that can work with an input voltage
range of 100–240 VAC, 50/60 Hz.
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of
non-use completely disconnect the product from power via breaker or by
unplugging it.
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the
housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
The Maverick MK2 Spot will work with a DMX controller using a 3- or 5-pin
DMX serial connection.
www.chauvetprofessional.com.
The Maverick MK2 Spot uses a 3- or 5-pin DMX data connection for its DMX
personalities: 24 and 32. See the User Manual for information about connecting
and configuring the product for DMX operation.
You can link the Maverick MK2 Spot to controller software using an Ethernet
connection. If using other Art-Net™ or sACN -compatible products with the
Maverick MK2 Spot, you can control each individually on a single network. See
the User Manual for information about how to connect and configure the product
for these signals.
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount
of DMX512 data using an Neutrik® etherCON® RJ45 connection over a large
network. An Art-Net™
www.chauvetprofessional.com.
Art-Net™ for best results.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.
Also known as ANSI E1.31, Streaming-ACN is an Ethernet protocol that uses the
layering and formatting of Architecture for Control Networks to transport
DMX512 data over IP or any other ACN compatible network. ACN is maintained
by the Professional Lighting and Sound Association (PLASA).
·
·
Wire (U.S.) Wire (Europe)
Black
White
Green/Yellow Green/Yellow
A DMX
protocol document
Chauvet Professional recommends using unicast
3
Contact Us
Omega Bracket w/
mounting hardware
Quick Reference Guide
Screw Color
Brown Yellow/Brass
Blue Silver
Green
Primer is available
is available
EN
at
from
from