Table of Contents
Advertisement
D、Power up
Power the DSL/Cable modem or modems.
Connect the supplied power adapter to the DLB-1200 and power up.
E、Check the LED
The Power Indicator and WAN 1/2 Indicator should be ON, if the corresponding WAN External Port was connected to a
DSL/Cable Modem、Firewall or a Router.
Ethernet LED
Power LED
WAN1 /WAN2 LED
Activity LED
Status LED
The corresponding Ethernet Indicator should be ON while a PC connected to the Ethernet Port. If any error condition
shows up, the Error Indicator stays ON.
Connection Legend
Here comes a connection legend, you have to connect your DSL/Cable Modems to WAN 1 and WAN 2 Port with DLB-1200,
then you have to connect DLB-1200 with your internal Switch or Hub. If you need to connect DLB-1200 with administrator's
PC directly, you have to use Cross Line as a connection.
Advertisement
Table of Contents
