Cisco Beacon Point Module Model Number; Installing A Cisco Beacon Point Module On An Access Point - Cisco Beacon Point Module Hardware Installation Manual

Cisco Beacon Point Module Model Number

Feature
Compliance standards
Environmental
Power Dissipation
Cisco Beacon Point Module Model Number
Cisco Beacon Point Module is available in the following model:
Table 4: Cisco Beacon Point Module Model Number
Product ID
AIR-RM-VBLE2-K9=

Installing a Cisco Beacon Point Module on an Access Point

These instructions demonstrate how to install a Cisco Beacon Point Module to an access point that is already
mounted to its location using a bracket.
Cisco Beacon Hardware Installation Guide
4
REVIEW DRAFT - CISCO CONFIDENTIAL
About Cisco Beacon Point Module
Description
UL 60950-1
CAN/CSA-C22.2 No. 60950-1
FCC Part 15.247, 15.107, and 15.109
FCC Part 15 Class B
RSS-247
ICES-003 (Canada)
ClassB EMC compliance
Fanless operation; passive cooling
Nonoperating (storage) temperature: -30 to 70℃ (-22
to 158℉)
Operating temperature: 0 to 40℃ (32 to 104℉)
Operating humidity: 10 to 90% (noncondensing)
Operating altitude: 9843 ft (3000 m)
Less than 4.5W
Description
Cisco Beacon Point Module with internal antennas
that can be mounted on supported access points.