Post-Configuration, Lon / Bacnet / Modbus / Ethernet / Knx Interface - Wolf WRS-K Configuration Manual

4. Proceed as follows for the re-configuration of a LON / BacNet / Modbus / Ethernet / KNX
interface.
11.4°C 18.5°C
20.03.09
FR
PRG OPERATING DATA
Esc MENUS
Press Esc Esc button
Main menus
Standard settings
Displays
Time functions
Contractor
SELECTION
Esc BACK
Select "Heating contractor" with
confirm with Enter
wolf-heiztechnik.de
Continue with
Contractor
Password: 1234
Select 1234 with and confirm with
Enter
6
Post-configuration, LON / BacNet /
Modbus / Ethernet / KNX interface
21.0
11:02
ON/OFF
SET VALUE
DISPLAY
and
Contractor - menus
Alarm management
Service
OtherNight ventilation
Limits
Esc BACK SELECTION
Select "Other" with and confirm with
Enter
Other...
BMS protocol
>LON-Works
Transfer speed
>4800 (RS485/RS422)
BMS address:
Esc CANCEL SAVE
Confirm with
Other...
Protocol type:
BacNet
Esc CANCEL SAVE
Select required connection with
- No proto
- pCO Manager
- LON-Works
- Bac-Net
- Modbus Stave Standard
- Ethernet
- KNX
and confirm with Enter
BMS protocol has been set
Hold down button until you jump to
Esc Esc
the standard screen
DISPLAY
001
VALUE
VALUE
3062933_201707