Nokia 8265 User Manual page 58

8265_1.BOOK Page 50 Friday, October 19, 2001 3:06 PM
11
7 Press Select.
The calling cards shown in the table below are frequently used with the
dialing sequences listed in the first column. However, this information may
vary and it is subject to change at the phone companies' discretion..
Dialing sequence
1. Access no.
2. Phone no.
3. Card no.
1. Access no.
2. Card no.
3. Phone no.
1. Prefix
2. Phone no.
3. Card no.
Save calling card information (step 2)
The order of the following steps may vary, depending on which dialing
sequence your card uses.
1 Enter the number and, when prompted for the calling card's access
number, enter the number and press OK. This number is usually the
1-800 number that is listed on the back of the calling card.
You can also retrieve the access number from your phone book if it is
stored. Press Search, then scroll to find the number.
2 When prompted to enter a calling card number (usually shown on
the front of the calling card) and PIN number, enter the numbers, and
press OK.
3 Press OK again when the Save changes? message appears.
Cards that require you to:
Dial 1-800 access number, then
phone number, then card number
(+ PIN if required).
Dial 1-800 access number, then
card number (+ PIN if required),
then phone number.
Dial the prefix (any numbers that
must precede the phone number)
and phone number you want to
dial, then card number (+ PIN, if
required).
[ 50 ]
Associated cards
MCI, Sprint
Canada, Unitel
networkMCI,
WorldPhone
MCI, AT&T
Verizon, PacBell,
AT&T, Stentor