Others; Using The Auxiliary Input; Auto Off; D-In Mode And Aux Mode - Panasonic SC-UA3 Owner's Manual

UA3PP_TQBJ2018_en.fm Page 13 Monday, May 15, 2017 9:58 AM

Using the auxiliary input

You can connect a VCR, DVD player etc., and listen to
the audio through this system.
Rear panel
of this unit
Audio cable
(not supplied)
1
Connect the external equipment.
2
Press [RADIO/EXT-IN] repeatedly to select "AUX".
3
Play the external equipment.
To adjust the input level
1
Press [PLAY MENU] to select "INPUT LEVEL".
2
Press [R, T] to select "NORMAL" or "HIGH" and
then press [OK].
Note:
Select "NORMAL" if the sound is distorted during "HIGH"
input level.

D-IN mode and AUX mode

1
Press [RADIO/EXT-IN] repeatedly to select "D-IN"
or "AUX".
2
Press [PLAY MENU] repeatedly to select
"D-IN MODE" or "AUX MODE".
3
Press [R, T] to select the mode and then press
[OK].
MODE 1 Select this mode to use the Karaoke
effect function.
MODE 2 Select this mode when watching TV,
(default) movies or using an external player with
Karaoke features.

Others

Auto off

DVD player
(not supplied) This system automatically turns off when you do not use
it for approximately 20 minutes.
1
Press [SETUP] repeatedly to select "AUTO OFF".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
This function does not work when you are in radio source or
when a Bluetooth
Bluetooth
This function automatically turns on the system when you
establish a Bluetooth
1
Press [SETUP] repeatedly to select
"BLUETOOTH STANDBY".
2
Press [R, T] to select "ON" and then press [OK].
To cancel, select "OFF".
Note:
Some devices may take longer to respond. If you are
connected to a Bluetooth
system, wait for a minimum of 5 seconds before connecting
to this system from your Bluetooth
Software update
Occasionally, Panasonic may release updated software
for this unit that may add or improve the way a feature
operates. These updates are available free of charge. For
more details, refer to the following website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
█
Checking the software version
1
Press [SETUP] repeatedly to select "SW VER." and
then press [OK].
The software version is shown.
2
Press [OK] again to exit.

Maintenance

To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this
system.
• Before using chemically treated cloth, read the
instructions that came with the cloth carefully.
digital printing
device is connected.
®
® standby
® connection from a paired device.
device before turning off the
®
® device again.
13
13