Messages/Voice Mail; Display Language - Mitel 6867 User Quick Reference Manual

Mitel 6867 Quick Reference Guide
Voice Mail

Messages/Voice Mail

Call voice mail system Press the Services key. Select
(e.g. record greeting VoiceMail
announcement):
Listen to received The message waiting lamp is
messages: slowly blinking and an envelope is
displayed when there is a pending
message.
Press the MessageWaiting softkey
Settings in the Telephone
Shortcut Keys
Do not program new shortcut keys from the phone,
because this programming can interfere with the keys used
by the system. Use the Web Interface to program the
shortcuts:
Operation > Softkeys and XML
Normally you can program bottom keys with key number 9
and higher
Normally you can program top keys with key number 2 or
higher.
A shortcut programmed by the user may be overwritten
by the system if the administrator later sets a new key
there.
The only type of shortcut that a user normally shall
program is speed dial keys with a phone number or a
procedure.
Program a new Use the web interface. See above
shortcut
Delete shortcut: Options List > Speed
Dial Edit Press the key to delete
and select Remove
14
Volume
Adjust volume during Press
a call:
Adjust ringing Press
volume: mode.
Time and Date
Set time format: Options List > PTime
and Date > Time Format
Set date format: Options List >Time
and Date > Date Format.
Silent Ringing and Mute
Switch off ring signal: Press the left Volume key until the
volyme is off.
Note: Ring signal is switched off until the right
Volume key is pressed
Mute microphone Press
during call:

Display Language

Change display
language: Language > Screen Language
* 08 *n#
Enter
system about the language
Press Dial
n = language number. Contact the
system administrator.
Change keypad Options List >
characters:
Language > Input Language.
when in idle
Options List >
to inform the
MX-ONE - Mitel 6867