In Case Of Difficulty - Sennheiser SH350 Instructions For Use Manual

Sennheiser noisegard instructions for use model hmdc 372 hmec 350/352/355/355-c/356/372/450
Hide thumbs Also See for SH350:
Table of Contents

Advertisement

Problem
Clear communication but no
active noise compensation
28

In case of difficulty

If problems occur that are not listed in the below table, please contact your Sennheiser
agent.
Possible cause and what to do
The NoiseGard™ electronics are turned off.
Check to see if the ON/OFF switch is set to "ON".
The XLR-3 plug has been pulled out of the power source.
Check to see if the XLR-3 plug is correctly connected to the power source.
If aircraft powered: The aircraft fuse is defective.
Check the aircraft fuse.
If battery powered (except HMEC 352, HMEC 355 and HMEC 356): The batteries are low.
Check to see if the yellow LED on the battery pack is lit. If the red LED is lit, replace
the batteries.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents