Hitachi CP-DX250 Service Manual page 54

Insert wire of IR board
Make sure wire route as shown, and fix the wire in cable saddle , please keep spare wire on Make sure wire route as shown, and fix the wire in cable saddle , please keep spare wire on Make sure wire route as shown, and fix the wire in cable saddle , please keep spare wire on
left side of the picture.
7.2.12 Assemble upper case with lower case and screws on Assemble upper case with lower case and screws on.
Screw*2
7.2.13 Assemble lamp door
Paste mylar (FILM LAMP EXPLODE FILM LAMP EXPLODE)
Cable saddle
Screw*5 Screw*5
FILM LAMP
EXPLODE
Screw*1
53
Screw*1