Cisco PIX Series User And Installation Manual page 133

Chapter 7 PIX 535
Install the first DIMM strip in socket J41 and the second DIMM strip in socket J44, as shown in
Step 8
Figure 7-8
Carefully grasp the DIMM strip from either end, being careful not to touch the components on the
a.
strip. Note that the DIMM strip is notched, which prevents it from being installed incorrectly. So,
do not force installation.
Open the two plastic wing connectors at the sides of the memory socket, insert the DIMM strip, and
b.
close the wing connectors to secure it in place.
Figure 7-8
Wing
connector
Figure 7-9
Reinstall the component tray and the screws that hold the assembly in place.
Step 9
Step 10 Remove the grounding wrist-strap.
Rack-mount the chassis or place it on a flat, stable surface.
Step 11
78-15170-03
and Figure 7-9.
Inserting a DIMM Memory Strip in the PIX 535
DIMM
Securing a DIMM Memory Strip in the PIX 535
Cisco PIX Security Appliance Hardware Installation Guide
Installing a Memory Upgrade
7-13