Cisco PIX Series User And Installation Manual page 113

Chapter 6 PIX 525
Reinstall the remaining fan. Make sure you orient the fan so that the cables feed to the right (toward the
Step 8
second fan). Route the cable over the fan before you reconnect it. When correctly assembled, the cables
appear as shown in
Starting with the fan farthest away from the power supply, bend the cable clamps over wires and into
Step 9
the gap between chassis and fan housing.
Figure 6-23 Correct Fan Cable Routing
78-15170-03
Figure 6-23.
Front panel
Cisco PIX Security Appliance Hardware Installation Guide
Installing a DC Power Supply
Sheet metal tabs
Base tabs
6-23