Iridium Stage PAR 14Z User Manual

Zoom 14 x 15w

Advertisement

Quick Links

User manual

CODE 114363
STAGE PAR 14Z - Zoom
14 x 15W
Import :
13 Rue Alfred Kastler - ZI
67850 HERRLISHEIM
FRANCE
Tel: +33 3 88 96 80 90
Fax: +33 3 88 96 48 46
info@gemarlumitec.fr
www.gemarlumitec.fr
Please read carefully before use

Advertisement

Table of Contents
loading

Summary of Contents for Iridium Stage PAR 14Z

  • Page 1: User Manual

    User manual CODE 114363 STAGE PAR 14Z - Zoom 14 x 15W Import : 13 Rue Alfred Kastler - ZI 67850 HERRLISHEIM FRANCE Tel: +33 3 88 96 80 90 Fax: +33 3 88 96 48 46 info@gemarlumitec.fr www.gemarlumitec.fr Please read carefully before use...
  • Page 2: Product Overview

    Product Overview knob MENU Power in Power out DMX in DMX out TFT displayer...
  • Page 3: Mechanical Specification

    Mechanical Specification 356.43mm 276.93mm 259.93mm 295.07mm 226mm...
  • Page 4: Dmx Set Up

    Unpacking: Thank you for purchasing the AH052. Every AH052 has been tested and DMX Set Up shipped in perfect operating condition. Carefully check the shipping carton for damage Your cables should be made with a male and female XLR connector on either that may have occurred during shipping.
  • Page 5 Features 14 DMX Channel DMX Channel Value Function OPTICS 0—255 Master dimmer ● Beam aperture: 8° to 40° 0—255 0—255 green ● High-effciency 42mm PMMA secondary optics 0—255 blue 0—255 white 0—49 Default dimmer LIGHT SOURCE 50—99 dimmer speed 1 ●...
  • Page 6 On Board System 4 DMX Channel DMX Channel Value Function 0—255 0—255 Staturation Address 0—255 Value(brightness) 0—255 zoom min to max Run Mode Slave 01 mode 05 mode Sound 00 speed 99 speed 8 DMX Channel 01 auto 10 auto DMX Channel Value Function...
  • Page 7: Dmx Control Mode

    DMX control mode Displayer introduction 2 DMX Channel DMX Channel Value Function ① ② ③ RGBW 10-14 15-19 BLUE 20-24 YELLOW CYAN 25-29 30-34 MAGENTA temp:043 35-39 WHITE DMX Address 40-44 ORANGE 45-49 PINK ④ VIOLET 50-54 55-59 AQUA 60-64 SKY BLUE 65-69 FULL WHITE...
  • Page 8 Address - DMX Address Setting via control board (3)Dim All - In this menu,you can set the brightness of the full color 1.Press “>” button ,then press the “∧” button or “∨” button until “Address” is showed. 1)Press the “∧” button or “∨” button until “Dim color” is showed, then press “>” button. 2.Press “>”...

Table of Contents