Magellan Maestro 4000 Instructions For Operating Manual page 33

The Magellan Maestro 4000/4040/4050 has three screens you can use to
assist you in traveling to your destination: the Map screen, the Maneuver
List screen, and the TrueView/Split TrueView screen.
Map: When a new destination is selected and calculated, the Map screen is
displayed. This screen displays a map of your surrounding area along with
the planned route (if calculated) and information about the route. This
screen can be accessed when no route has been calculated by selecting Map
or by pressing the VIEW key (see "Front View" on page 5.) while at the
Destination screen.
Maneuver List: This screen is available only when a route has been
calculated. This screen displays a list of maneuvers to follow in order to
arrive at the destination. It can also be used exclude a maneuver and then
recalculate the route. To access the Maneuver List screen, press the VIEW
key (see "Front View" on page 5.) while viewing the Map screen.
TrueView: This screen is available only when a route has been calculated.
This screen displays the next maneuver as a 3D graphic. It will help you to
know which lane to be in and provides you with an easy-to-follow picture of
the next maneuver. To access the TrueView screen, press the VIEW key
(see "Front View" on page 5.) while viewing the Maneuver List. You can
also show the TrueView in split mode (see "TrueView Options" on page 60).
This view shows the TrueView screen on the left side and the Map on the
right side.