Krell Industries S-350 Quick Setup Manual

Connecting the S-350 Follow these steps to connect the S-350 to your system.
to Your System
1. Make sure all power sources and components are off before connecting
inputs and outputs.
Krell recommends using balanced
2. Neatly organize the wiring between the S-350 and all system components.
interconnect cables. Balanced
Separate AC wires from audio cables to prevent hum or other unwanted
interconnect cables not only can minimize
noises from being introduced into the system.
sonic loss but are also immune to induced
noise, especially with installations using
3. Balanced outputs use three-pin XLR connectors. Single-ended outputs use
long cables. Balanced connections have 6
RCA connectors. Maintain the correct left/right orientation of these outputs.
dB more gain than single-ended
connections. When level matching is
4. To play DVD discs (S-350av), connect desired video output to
critical, keep this gain value in mind.
preamp/processor or display's video input. For use with a
preamplifier/processor, connect digital audio output to digital audio input.
Pin assignments for XLR connectors:
5. For two-channel compact disc playback only, connect the S-350 digital audio
Pin 1 Shield (ground)
outputs to the D/A convertor or preamplifier/processor digital input or
Pin 2 Non-inverting (hot) (0°)
balanced/single-ended analog audio outputs to the preamplifier balanced or
Pin 3 Inverting (cold) (180°)
single-ended analog audio inputs.
6. Plug the AC power cord into the IEC power connector on the back panel.
Then plug the AC power cord into the wall socket.
Operating the S-350 Press the back panel power switch (35) labeled "1". When the S-350 is initialized
and in the stand-by mode, the red stand-by LED (2) on the front panel
Note illuminates. Then press the power button on the front panel or the power key (1)
The S-350 reads data discs. For example, if you on the remote control, to place the S-350 in the operational mode. When the
prepare a CDR or DVR containing MP3 audio files,
blue power LED (2) illuminates, the S-350 is in the operational mode.
you can play the discs on the S-350. The following
1. Insert disc into the slot
terminology appears in the front panel display, to help
you navigate a data disc:
2. Press the play button or key. The format type is visible in the front panel
ROOT = The beginning of the disc.
display. The format type disappears and the front panel display reads TRACK
F = A closed folder.
1 and the track time, as the disc begins playing.
TOP = An open folder.
Press the enter button or key (11) to open a folder, 3. Adjust the volume level through your system volume control.
move to the previous folder, or play a track.
4. Press the stop button or key to end disc playback.
Press the up and down arrows or keys (10) to move
between tracks in a folder.
5. Press the play button or key (6) to begin playback again, from the first track.
6. To return the S-350 to the stand-by mode, press the power button or key (1).
1. Do not install near any heat sources such as radiators, heat registers, stoves,
or other apparatus (including amplifiers) that produce heat.
2. Unplug this apparatus during lightning storms or when unused for long
periods of time.
3. Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as a power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
4. The ventilation grids on the top of the apparatus and the space underneath it
Licensing attributions: must be unobstructed at all times during operation. Do not place flammable
Manufactured under license from Dolby Laboratories.
material above or beneath the apparatus.
Dolby is a trademark of Dolby Laboratories.
5. Before making connections to the Evolution 505, ensure that the power is off
Manufactured under license under U.S. Patent #'s:
5,451,942; 5,956,674; 5,974,380; 5,978,762;
and other components are in mute or stand-by mode. Make sure all cable
6,487,535 & other U.S. and worldwide patents issued
terminations are of the highest quality, free from frayed ends, short circuits, or
& pending. DTS and the Symbol are registered
trademarks & DTS Digital Surround and the DTS cold solder joints.
logos are trademarks of DTS, Inc. Product includes
Please contact Krell if you have questions not addressed in this guide.
software. © DTS, Inc. All Rights Reserved.
S-350
MODEL
4 Krell S-350 Krell Industries, LLC., 45 Connair Road,Orange, CT 06477-3650 USA
TEL 203-799-9954, FAX 203-891-2028, E-MAIL krell@krellonline.com
WEB SITE http://www.krellonline.com
SERIAL NUMBER
P/N 310784
v 1.0
KRELL
THE LEADER IN AUDIO ENGINEERING
Getting Started
Thank you for your purchase of the Krell S-350. The S-350 CD/DVD Player is a modular
design featuring reference caliber CD playback as well as an optional state-of-the-art
video engine that provides stunning 1080p performance and video processing controls.
The S-350 can be outfitted with different outputs to match the requirements of any high
performance audio or home theater system.
Configurations include:
• S-350a - High performance CD player with balanced analog outputs
• S-350av - Complete package including audio and video options
Please contact your authorized dealer, distributor, or Krell if you have any questions not
addressed in the owner's reference.
WARNINGS
Do not place the compact disc player where it could be exposed to dripping or splashing.
Do not remove or bypass the ground pin on the end of the AC cord. This may cause radio
Safety notices:
frequency interference (RFI) to be introduced into your playback system.
This CLASS I apparatus must be
connected to a MAINS socket outlet
The ventilation grids on the top and bottom of the S-350 must be unobstructed at all times during
with a protective earthing
operation. Do not place flammable material on top of or beneath the component.
connection.
Turn off all systems' power before connecting the S-350 to any component. Make sure all cable
terminations are of the highest quality, free from frayed ends, short circuits, or cold solder joints.
Caution: Visible and invisible laser radiation. When the cover is open, avoid exposure to beam.
This unit employs a laser. To prevent possible eye injury, only a qualified service person should
remove the cover or attempt to service this device. Use of controls or adjustments or performance
of procedures other than those specified herein may result in hazardous radiation exposure.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE ANY KRELL PRODUCT.
Unpacking
1. Open the shipping box and remove the top layer of foam. You see these items:
1 S-350
Note
1 S-350 remote control
Save all packing materials.
If you need to ship the S-350 in the 1 IEC connector (AC power) cord
future, repack the unit in its original
2 AAA batteries
packaging to prevent shipping
damage.
2. Grasp the underside of the foam end-caps that encase the S-350 and lift it straight out
of the shipping box.
3. Place the S-350 in a safe location and remove the protective plastic wrapping.
Place the S-350 on a firm, level surface, away from excessive heat, humidity, and
Placement
moisture. The S-350 requires at least two inches (5 cm) of clearance on each side and
at least two inches (5 cm) of clearance above and below the component to provide
adequate ventilation. Installations inside cabinetry may need extra ventilation.
Do not place the S-350 near hum sensitive components such as preamplifier phono
stages or turntables. Although the S-350 is well shielded, placing it near these
components could create interference and cause hum.
The S-350 has superb regulation and does not require a dedicated AC circuit. Avoid
AC POWER GUIDELINES
connections through extension cords or multiple AC adapters. High
quality 15 amp grounded AC strips are acceptable. High quality AC line conditioners may
be used if they are grounded and meet or exceed the unit's power supply rating of 50 VA.
This product complies with the EMC directive (89/336/EEC)
and the low-voltage directive (73/23/EEC).
S-350
CD/DVD Player
QUICK SETUP GUIDE
1 12 VDC (12 V trigger) cable
1 T-10 Torx wrench
1 Quick Setup Guide
Krell S-350 1