Analogue Inputs, Temperature Probes - Lennox Climatic 200 Installation Operating & Maintenance Manual

ANALOGUE INPUTS
MAIN DISPLAY
Visualizes:
Inlet water temperature
Active alarms
mode mode
+ +
on off on off
>2" <2"
Inlet water temperature.
Probe St1
Outlet water temperature.
Probe St2
Probe St3 Piping temperature at circuit 1.
Probe St4 Outdoor temperature (with option Dynamic set point).
Probe St6 Piping temperature at circuit 2 (ONLY MODEL Climatic
For every unit without anti-freeze the minimum outlet water temperature should be 5ºC.
For applications where the outlet water temperature is lower than 5ºC is necessary to use anti-freeze.
AFFECTED PARAMETERS
Code that appears on
the display
1 CIRCUIT UNIT MODEL Climatic
2 CIRCUITS UNIT MODEL Climatic
SET POINT
Press
Probe status
NOTE: When the leds on the
display lit alternatively from
one to the other, you are on
menu mode.
DESCRIPTION
®
200
Unit for temperature measure:
0: the temperature is visualized on ºC
1: the temperature is visualized on ºF
®
400
Unit for temperature measure:
0: the temperature is visualized on ºC
1: the temperature is visualized on ºF
mode
Press
on off
®
400).
MAX: Maximum value for the parameter.
MIN: Minimum value for the parameter.
The default value, factory set.
DEF:
UNIT: The units of measure used.
VAR.: Minimum variation allowed.
MIN MAX
0
0
10
Probe value
Probe value
Probe value
Probe value
Probe value
DEF UNIT VAR.
1 0 ---
1 0 ---
1
1