Table of Contents
Advertisement
MENU MODE
Press
and
mode
on off
to get to the menu mode
To move through the menu on this way
Press
and
mode
on off
To move through the menu on this way
Press
and
mode
on off
To move through the menu on this way
To move through the menu on this way
MENU STRUCTURE
MAIN DISPLAY
Visualizes:
Inlet water temperature
Active alarms
Water temperature adjustment menu.
Status temperature probes menu:
St1: Inlet water temperature.
St2: Outlet water temperature.
St3 and St6: Piping temperature.
St4: Outdoor temperature (with option Dynamic set point).
Active alarms Menu.
Configuration parameters menu.
Password to access to parameters configuration (number); the password is 38.
Operating hours resources management (compressor, water pump).
buttons and release within 2 seconds, to enable the user
buttons simultaneously and release within 2 seconds.
buttons simultaneously during more than 2 seconds.
LEVEL 1
SET POINT
Probe status
ALARMS
PARAMETERS
PASSWORD
OPERATING HOURS
:
:
, press:
, press:
Cooling set point
Heating set point
Codes
Active alarms Codes
Password value (number 38)
Compressor operating
hours
Water pump operating hours
8
mode
+
on off
>2"
NOTE: When the leds on the
display lit alternatively from
one to the other, you are on
menu mode.
LEVEL 2
Set point value cool
Set point value heat
Probe value
-----
-----
Amount of hours
---
Amount of hours
mode
+
on off
<2"
LEVEL 3
Hide quick links:
Advertisement
Table of Contents
