WARNING:
Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in
Before working inside your
your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Remove the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly.
2
With the computer face-down, open the computer at an angle.
3
Using a plastic scribe, pry the base cover from the palm-rest assembly.
Removing the base cover
computer. After working inside your computer, follow the instructions in
After working inside
www.dell.com/
Removing the base cover
6
15