[Auto Setup Setting]; [Signal Search]; [Back Color]; [Wide Mode] - Panasonic PT-VW360 Operating Instructions Manual

[AUTO SETUP SETTING]

Set the automatic execution of AUTO SETUP.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SETUP SETTING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[BUTTON]

[SIGNAL SEARCH]

Set to enable/disable the signal search function.
If the signal search function is enabled, the input with input signal is automatically selected when the power is
turned on and the projection is started. In addition, if the <AUTO SETUP> button is pressed when the currently
selected input has no signal, it automatically switches to the input with input signal.
1) Press as to select [SIGNAL SEARCH].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]

[BACK COLOR]

Set the display of the projected screen when there is no signal input.
1) Press as to select [BACK COLOR].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f To create/register the [USER LOGO] image, use "Logo Transfer Software". The software can be downloaded from the Panasonic website
(https://panasonic.net/cns/projector/).
f If you do not register the image of the [USER LOGO], the projected image will be displayed in black even if the [BACK COLOR] is set to
[USER LOGO].

[WIDE MODE]

Use this function when the image is displayed incorrectly for the input signals.
1) Press as to select [WIDE MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[OFF]
[ON]

[SXGA MODE]

This function is used if the whole projected image is not displayed when the resolution 1 280 x 1 024 dots of the
SXGA signal is input.
Chapter 4 Settings - [DISPLAY OPTION] menu
If the image being projected changes to an unregistered signal, the auto setup is automatically performed.
Enables the auto setup function only when the <AUTO SETUP> button is pressed.
Enables the input detection function.
Disables the input detection function.
Displays the entire projection area in blue.
Displays the entire projection area in black.
Displays the Panasonic logo.
Displays the image registered by the user.
Displays by judging the signal automatically. Set to this mode normally.
When input the 4:3 signal.
When input the wide signal.
ENGLISH - 71