UsingTheHairClipper - Panasonic ER1611 Operating Instructions Manual

Chargingwithoutthechargingstand

1.PresstheOFF/ONswitchtoturnoffthe
power,andinserttheappliancepluginto
theclipper.
2.Plugintheadaptorintoahousehold
outlet.
ACoperation

If you connect the AC adaptor to the clipper in the same way as for
charging, and turn on the power, you can use it even if the battery
capacity is low.
•
If the clipper does not operate, charge the clipper for
approximately 1 minute.
•
Be careful not to discharge the battery completely with the power
left turned on. It results in shortening the battery life.
4
ER1611_ASIA.indb 4

Usingthehairclipper

Turn the dial clockwise or counterclockwise to
adjust the moving blade back and forth to get the
desired height. Adjustable in 5 stages from 0.8 mm
to .0 mm in 0.3 mm steps without attachments.
Usingthecombattachments

1
1
Selectthetrimmingheights
indicatedontheinsidesand
sidesoftheattachments.
2
2
Setthedialto"0.8"andthen
mounttheattachmenttothe
clipperasillustrated.
Removingtheattachmentfromtheclipper
Slide one side of the attachment off the
mounting in direction indicated with the arrow.
0.8
0.8
2011/09/15 11:48:34