Powering The Pilot Controller Off; Mode Page; Adjusting The Displays Brightness - Raymarine p70 Quick Reference

Powering the pilot controller off

1. From any data page press and hold the STANDBY button.
After 1 second a power down pop up will appear.
2. Continue to hold the STANDBY button for a further 3 seconds to
complete the power off.
Note: The pilot controller cannot be turned off whilst in AUTO
mode.

Adjusting the displays brightness

To adjust the brightness of the individual display:
1. Whilst in a favorite page momentarily press the LEFT SOFT
button.
This will open the brightness setting screen.
2. Use the UP and DOWN buttons to change the brightness
percentage to the required level.
3. Press the RIGHT SOFT button to confirm new brightness and go
back to the favorites page you were on.
Simulator
The Simulator mode enables you to practice operating your display
without live data from a transducer or other connected peripherals.
The simulator mode is switched on/off in the Simulator option from
the Setup Menu.
Note: Raymarine recommends that you do NOT use the
simulator mode whilst navigating.
Note: The simulator will NOT display any real data, including any
safety messages (such as those received from AIS units).
Note: Any system settings made whilst in Simulator mode are not
transmitted via SeaTalk to other equipment.

Mode page

The mode page is the initial screen displayed after set up of the
device. If the device is being switched on for the first time, the user
is taken to the initial Set up wizard. Once the device has been set
up they will then proceed to the Mode page. The mode page is used
to show what mode you are in and also relevant pilot information
for that mode.
The selection of vessel type during the initial set up determines
which profile and menu structure the pilot will be set to (e.g. Power,
fishing or sailing boat):
The modes available will depend on the vessel type chosen during
initial set up.
• Pattern 1 — Fishing boat only (this will take you to the most
common pattern for the last 10 selections.
• Pattern 2 — Fishing boat only (this will take you to the second
most common pattern for the last 10 selections.
• Pattern — Power and fishing boats only.
• Track — all profiles.
• Wind vane — sailing boat only.
• Power steer — all profiles (p70r rotary controller and joystick only).
• Shortcut key- allows you to set which pilot mode is mapped to the
left soft button when in pilot view.
5