Specifications - Bose 3-2-1GS Series II Service Manual

System Specifications:
Power Rating:
US/Canada:
Europe/UK/Aus:
Japan:
Dual Voltage:
Console Inputs:
Video Outputs:
External Antennas:
Maximum Ambient Temperature:
Low Frequency Cut-off (typical):
Arrays:
Bass Module:
Woofer Impedance:
Weights:
3•2•1 Series II Packed System:
3•2•1GS Series II Packed System:
Console:
Bass Module:
3•2•1 Arrays, each:
3•2•1GS Arrays, each:
IR Remote Control (batteries installed):
Dimensions:
Console:
Bass Module:
Bass Module internal volume:
3•2•1 Arrays:
3•2•1GS Arrays:
IR Remote:
Distortion and Noise:
Dynamic Range:
Distortion:
Output Noise:

SPECIFICATIONS

120VAC, 60 Hz, 300W
220-240VAC, 50/60 Hz, 300W
100VAC, 50/60 Hz, 300W
115/230VAC, 50/60 Hz, 300W
VIDEO, CAB/SAT, AUX
Composite Video, S-Video, Component Video
FM, 75 Ohm F-Connector (PAL, Europe)
AM Loop, 2.5 mm mono connector
45 degrees C
3•2•1 Array Cube: 180 Hz
3•2•1GS Array Cube: 212 Hz
45 Hz
1.5 Ohms nominal DC resistance single woofer
47.9 lb (21.7 kg)
44.1 lb (20.0 kg)
6.8 lb (3.08 kg)
24.9 lb (11.77 kg)
3.0 lb (1.40 kg)
1.1 lb (0.50 kg)
0.44 lb (0.20 kg)
13.8 x 10.0 x 3.2 inches (34.9 x 25.3 x 8.2 cm)
14 x 7.5 x 20.1 inches (35.6 x 18.4 x 51.1 cm)
1205 cubic inches (19.7 liters)
7.9 x 5.3 x 3.4 inches (200 x 134 x 86 mm)
5.6 x 2.6 x 4.2 inches (142 x 65 x 106 mm)
9.0 x 2.6 x 1.2 inches (229.6 x 64.8 x 31.2 mm)
-78 dB THD+N, unweighted, 22-22 kHz for a
1 kHz signal at -1 dB -90 dB THD+N,
unweighted, 22-22 kHz for a 1 kHz signal at -10 dB
-90 dB THD+N, unweighted,
22-22 kHz for a 1 kHz signal at -60 dB
< 0.1% @ 0.5 W
< 400 mVrms, A-weighted
5