Entering Characters - LG -DM515 User Manual

Entering Characters

You will be provided with 4 types of modes (English Lower, English Upper, Digit, Symbol) to
enter the characters. Use the mode key(left softkey) to change among the modes while entering
the characters. The present mode is indicated on the left softkey screen. Whenever you press the
left softkey, the modes will change in the order of "ENG" - "eng" - "Digit" - "Symbol". Select
the mode before you enter the characters, and enter the characters.
1. When the mode is ready for entry, the cursor ("|") will be indicated on the space for entry.
(If you enter one character, the cursor will move to the following space automatically and
wait for entry.)
2. Use the right side (è) key in the "ENG" - "eng" state to place a space among the characters.
3. Verify if the
cursor is
placed
where the
character is
to be entered, and change the mode by using left softkey.
4. Verify if the mode requested is indicated on the left softkey screen, and enter the character.
5. Use 8 keys of [2]~[9] to enter the character in the "eng" and "ENG" mode. One key is
designated with three or more than three characters. Therefore, press each key repeatedly for
a short period of time until the character requested appears. For example, if you want to enter
a character "K", set the "ENG" mode with the left softkeys and then press [5] key twice for
short time continuously.
6. Enter the numbers of 0~9 with ten keys from [0] to [9] in a "DIG" mode.
(Reference: The "ENG", "eng" and "DIG" modes remain in the same state even after you
enter a character, while the "Symbol" mode automatically change into an "eng" mode after
you enter one character.)
7. Enter a special code or icon in the "Symbol" mode. An icon set is indicated in the order of 12
keypads with the Navigation Button in a "Symbol" mode. Press the key corresponding to the