Advertisement
If you would like to move the entry to a new location and keep the original entry, then
press and hold [CLR] to erase the location and enter a new two digit location. You will
see the name associated with the entry.
10.
Edit name
Press [CLR] to erase one letter at a time, or press and hold [CLR] to erase the entire
name. Press [? *] to move the cursor backward. (See page ___ for details on entering
names.) Skip this step to leave the name unchanged.
11.
Confirm changes
Press [MENU] or [STO] when you finish editing the name. You will see: N numbers
saved at XXX. (N is the total of numbers stored in the location and XXX is the location
number.)
12.
Exit menu
Press [END] to exit the menu, or you may scroll to other features.
Tip:
Store up to four numbers per entry. If four are a lready stored, you will not see the empty
cursor.
Viewing your number
Use this feature to view your phone's currently active number.
1.
Enter menu
Press [FCN] then [MENU].
2.
Enter phone book
Press [MENU] to select: Phone Book.
3.
View number
Press [↑] or [↓] to scroll to: View my number, and press [MENU] to select. The display
will show the currently active number. After 6 seconds the phone will return to step 3.
4.
Exit Menu
Press [END] to exit the menu, or you may scroll to other features.
Shortcut:
Press [RCL], [#? ] to view your phone number.
Number preference
[Number Prefer OFF]
When placing calls:
If you prefer to see the number (calling 555-1212) instead of the name (calling Jane Smith)
when you place a call from the internal phone book, turn Number preference ON.
CMR2100 UM.doc
34/78
Advertisement
