Table of Contents
Advertisement
Applicant: Shintom Co., Ltd.
CURRENT SID, CHANNEL AND RSSI
LEVEL DISPLAY
You can see the current SID (System Identification), chan-
nel No. and RSSI level at a time. The RSSI is the signal
strength of the current channel of operation represented in
voltage. The higher voltage shows the better connection and
clearer communications.
1. Press f, *, 6.
2. To clear the display, press c
ELECTRONIC SERIAL NUMBER (ESN)
Press f, #, 2 to display your ESN.
To clear the display, press c.
ANTI FRAUD SECURITY FEATURE (PIN
Feature)
If your cellular carrier offers Personal Identification Num-
ber (PIN) service, your new phone must be programmed with
your PIN. For your protection, you cannot make any outgo-
ing calls until establishing your PIN. Please contact your
cellular service provider for specific instructions.
To Place a Call Using the PIN service:
1. Enter the telephone number.
2. Press s.
3. Press s again. Your call will then be placed.
To Enter the PIN and Turn the PIN Feature ON or OFF:
1. Press f, #, *.
2. Enter the 3-digit Unlock code.
Note: Please contact your selling Audiovox dealer to
3. Enter your PIN (up to 6 digits).
4. Press ^ or v to turn the PIN feature on or off.
5. Press
6. To exit the mode, press c.
"PIN" will flash in the display.
check the initial Unlock code.
.
R/S
EXHIBIT 20
PAGE 42 OF 52
Transmitter Type: BFYT3017
RSSI LEVEL
YiAB
3.3
S00006
SID
C0327
CHANNEL NO.
35
Advertisement
Table of Contents
