Yamaha DTXTREME III Service Manual page 2

DTXTREME Ⅲ
This manual has been provided for the use of authorized Yamaha Retailers and their service personnel. It has been assumed that basic
service procedures inherent to the industry, and more specifically Yamaha Products, are already known and understood by the users,
and have therefore not been restated.
WARNING :
Failure to follow appropriate service and safety procedures when servicing this product may result in personal injury,
destruction of expensive components and failure of the product to perform as specified. For these reasons, we advise
all Yamaha product owners that all service required should be performed by an authorized Yamaha Retailer or the
appointed service representative.
IMPORTANT :
This presentation or sale of this manual to any individual or firm does not constitute authorization certification,
recognition of any applicable technical capabilities, or establish a principal-agent relationship of any form.
The data provided is belived to be accurate and applicable to the unit(s) indicated on the cover. The research engineering, and service
departments of Yamaha are continually striving to improve Yamaha products. Modifications are, therefore, inevitable and changes in
specification are subject to change without notice or obligation to retrofit. Should any discrepancy appear to exist, please contact the
distributor's Service Division.
WARNING :
Static discharges can destroy expensive components. Discharge any static electricity your body may have accumulated
by grounding yourself to the ground bus in the unit (heavy gauge black wires connect to this bus.)
IMPORTANT :
Turn the unit OFF during disassembly and parts replacement. Recheck all work before you apply power to the unit.
WARNING:
This product contains chemicals known to the State of California to cause cancer, or birth defects or other reproductive harm.
DO NOT PLACE SOLDER, ELECTRICAL/ELECTRONIC OR PLASTIC COMPONENTS IN YOUR MOUTH FOR ANY REASON WHAT SO EVER!
Avoid prolonged, unprotected contact between solder and your skin! When soldering, do not inhale solder fumes or expose eyes to solder/
flux vapor!
If you come in contact with solder or components located inside the enclosure of this product, wash your hands before handling food.
WARNING
Components having special characteristics are marked
originally installed.
印の部品は、安全を維持するために重要な部品です。交換する場合は、安全のために必ず指定の部品をご使用ください。
SAVING DATA（データの保存）
Saving and backing up your data
• DRAM data is lost when you turn off the power
to the instrument. Save the data to external
USB storage device.
Be sure to
• Never attempt to turn off the power while data
perform it
is being written to Flash ROM (while a "Please
keep power on" message is shown). Turning
the power off in this status results in loss of all
user data and may cause the system to freeze
(due to corruption of data in the Flash ROM).
This means that this instrument may not be
able to start up properly, even when turning the
power on next time.
Saving factory preset data
• When you save your original data to flash
ROM, the factory preset data in some area of
the fl ash ROM will be lost. Before saving your
Be sure to
perform it
original data, be sure to save the factory preset
data to external USB storage device.
Backing up the external USB storage device
• To protect against data loss through media
damage, we recommend that you save your
important data onto two USB storage devices.
Be sure to
perform it
2
IMPORTANT NOTICE
and must be replaced with parts having specifi cation equal to those
必ず実行
必ず実行
必ず実行
作成したデータの保存とバックアップ
・DRAM のデータは電源を切ると消えてしまい
ます。保存しておきたいデータは外部 USB 記
憶装置に保存してください。
・フ ラ ッ シ ュ ROM へ の 書 き 込 み 中 ( 画 面 に
「Please keep power on.」と表示されます ) に、
絶対に電源を切らないでください。ユーザー
メ モ リ ー 上 の デ ー タ が 失 わ れ た り シ ス テ ム
データが壊れたりして、次に電源を入れたと
きに正常に起動しなくなる恐れがあります。
工場出荷時のデータの保存
・ ご自身で作成したデータをフラッシュ ROM に
保存すると、フラッシュ ROM 上で工場出荷時
のデータが消えてしう領域があります。あら
かじめ工場出荷時のデータを外部 USB 記憶装
置に保存してください。
外部 USB 記憶装置のバックアップ
・保存した外部 USB 記憶装置の万一の事故に備
えて、大切なデータはコンピューターや予備
の USB 記憶装置にバックアップとして保存さ
れることをおすすめします。