Sears 90 Owner's Manual page 49

display text )
I
position cursor at
first character
EX. ' [
I market. _e planning to introduce sever J
al new sets with different combination.
T V
STORI_ BI_CK
t
move cursor to
last character
I
_- move cursor to
target position
I
l lmprov_
$TORB
EX.
I Improvements.
#0
We
are planning to
J
introduce several
newsets
with
differen]
u
Block Move
This function moves a block of text to a specified location
in the file.
1) Display the file text using the edit mode.
2)
3)
Position the cursor on the first character of the text to be
moved.
Hold down the Code Key and press the "P" Key. This
marks the beginning of the block. Two beeps sound and
a "W' appears above "BLOCK" on the display, indicating
that the block function is in effect.
4)
Move the cursor to the last character of the text to be
moved.
5) Hold down the Code Key and press the "P" key again to
mark the end of the block. Two beeps sound, indicating
that the block of text has been defined. The defined block
of text starts flashing on the display.
6) Move the cursor to the position where you want to move
th_ block of text.
7)
@
Hold down the Code Key and press the "M" Key. The
block of text is moved to the specified position. "Y"
above "BLOCK" disappears. The block function is can-
celed at this time.
When a block of text is moved, succeeding characters are
shifted to the left to fill in the space created by the moving
of text.
44