Sears 90 Owner's Manual page 104

3. Block Delete
display lext )
I
L position cursor a!
first character
J come. _Thankyou again your j
for continu
ed use of our products. Wewait for your"J
come..Thank you again for your continu J
I
T T
STORI_ BLOCK
move cursor to ) last character
)
o.
,Jcome, _Wewait foryourreply.
I
¥
STORE
I
Ex.
This function deletes a block of text in a file.
1) Display the file text using the edit mode.
2)
3)
4)
5)
6) ¸
Position the cursor on the first character of the text to be
deleted.
Hold down the Code Key and press the "P" Key. This
marks the beginning of the block. Two beeps sound and
a "_'" appears above "BLOCK" on the display, indicating
that the block function is in effect.
Move the cursor to the last character of the text to be
deleted.
Hold down the Code Key and press the "P" key again to
mark the end of the block. Two beeps sound, indicating
that the block of text has been defined. The defined block
of text stads flashing on the display.
Hold down the Code Key and press the Correction Key.
The blo¢k of text is deleted and all succeeding text is
shifted to the left to flu in the space created. The "Y"
mark above "BLOCK" disappears, indicating that the
block function is canceled.
45