Operation; Product View And Parts Identification - Craftsman 536.886531 Owner's Manual

.................. r , HHH'""t' ''"""1' __" ..... ' '"""L .......... -
OPERATION
KNOW YOUR SNOW THROWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR SNOW
THROWER.
Compare the illustrations with your snow thrower to tamiliarize yourself with the location of various
controls and adjustments Save this manual for luture reference
AUGER -TRACTION DRIVE
LEVER LEVER
SPEED SHIFTER
LEVER
CHUTE DEFLECTOR
_CRANK
ASSEMBLY
_BUTTON
CHUTE
SCRAPER BAR
FIG. 8
n l m,un,,, ,nil,,, ,U,,,H , nH ,,H,',,,',' , ,.,P..
SEARS SNOW THROWERS conform to the safety standards of the American National Standards Institute
AUGER DRIVE LEVER- Starts and stops the auger and
impeller (snow gathering and throwing)
TRACTION DRIVE LEVER - Propels the snow thrower
forward and in reverse,
SPEED SHIFTER LEVER - Selects the speed of the
snow thrower (6 speeds forward and 2 speeds reverse)
CRANK ASSEMBLY - Changes the direction of snow
throwing through the discharge chute
CHUTE DEFLECTOR- Changes the distance the snow
is thrown
DISCHARGE CHUTE. Changes the direction the snow
is thrown
HEIGHT ADJUST SKIDS- Adjusts the ground clearance
of the auger housing
IGN1TION KEY - Must be inserted to start the engine
RECOIL STARTER HANDLE - Starts the engine manu-
--. alI_
CHOKE CONTROL - Used to start a cold engine
PRIMER BUTTON- Injects luel directly into the carbure-
tor manilotd for last slarts in cold weather
THROTTLE CONTROL - Controls the engine speed
10