User Interface; System Status And Configuration; Terminal; Site Log - Siemens Sicore II Installation And Commissioning Manual

Product Features Description
4.6.

User Interface

The primary interface for user actions is a web based interface available locally on a network
via the Ethernet interface or via WiFi. This interface gives access to and control of all areas
necessary for day to day maintenance including:
·

System Status and Configuration.

·

Site Log

·

Fault Table

·
System Log
·
System Status
·
ANPR Live View
The following sections summarize the user interface tabs available. The User Interface is
described in detail in the Sicore II Operating Instructions Handbook Ref para 1.3.
Basic connection and logon information can be found in section 6.8.1.4 of this document.
4.6.1. System Status and Configuration
These pages allow the user to configure the system operation in detail as well as monitor
system functions.

4.6.2. Terminal

This provides a command line interface for entering various low level commands to the
camera. This interface should only be used by experienced installers under instruction from
Support Personnel from Siemens Plc.
4.6.3. Site Log
The Site Log records significant site events. System firmware update is automatically
recorded in the site log. It is also possible for the user to create text records, either with or
without a file attachment.
Attachments can be useful to record site details through diagrams, photographs, documents,
etc.
4.6.4. Fault Table
The Fault Table shows both Faults and Notifications that are currently active.
A fault is an abnormal condition which requires corrective action to be taken.
A notification provides information to the user but does not necessarily require any
immediate action.
Many faults will be automatically removed from the Fault Table when the condition which
caused the fault is removed. Some faults are latched and require manual clearing. A button is
displayed next to this latter type of fault which can be used to clear the fault. To clear the
fault, press the button and follow the instructions.
The 'View History' buttons show faults and notifications that have cleared automatically or
been manually cleared.
Sicore II Installation and Commissioning Guide
667/HB/52600/000 Issue 2 Unrestricted
22