Kenmore 11682 Owner's Manual page 15

SECTION 2. PREPARE YOUR MACHINE FOR SEWING
Pick Up Your Bobbin Thread
Raise presser foot lever. Hold top
thread loosely in left hand and rotate
handwheel toward you one complete
turn.
2. Bring bobbin thread up by pulling
top thread,
3.
F
Pull both threads under and to the
back of the presser foot, leaving 4
to 6 inchesof thread clear.
If you cannot pick up bobbin thread by following steps given above, then check:
1. Is needle threaded from front to back?
3. Are 3 t-0-_'lTn-_nes of thread com;ng from the shuttle?
4. Is thread from shuttle tangled?
5. Is bobbin properly installed in the bobbin case?
6. Is the machine threaded according to the instructions?
11