Pioneer VSX-607RDS Service Manual page 57

Remote Control Unit
1
RECEIVER power button
2 MUTING button
Press to mute the volume.
3 [When set to SURROUND (OPERATIONS)]
%, fi, @, # (Select/Adjust) buttons
[When set to other than SURROUND (OP-
ERATIONS)]
*(Pause), & (Stop), !(Rewind), ⁄(Fast Forward),
ENTER/# (Play) buttons
[Tuner Operations]
FQ +, FQ –, MPX, DISP. MODE, #(FM/AM) buttons
MPX: Use to switch the auto stereo/monaural mode for
receiving FM broadcasts. When the received broadcast
signal is weak, press this button to set the monaural
mode.
4 VOL (–, +) buttons
5 [TV Operations]
Selects the TV broadcast channel.
[Tuner Operations]
Select the Tuner station.
[CD, LD, DVD Operations]
$, › (Chapter/Track Search) buttons.
Downloaded from www.Manualslib.com
RECEIVER TV
FQ
+
DISP.
MPX
MODE
ENTER
–
FQ
VOL VOL
CHANNEL
MULTI CONTROL
DVD/LD CD
VCR TUNER
TV CONTROL
SURROUND
PRO LOGIC DSP MODE VIRTUAL 5.1CH
1 2 3 4
CENTER REAR
6 8
5 7
TEST TONE
DIRECT LOUDNESS
9 0 +10
DISC
CLASS TV/VCR
FUNCTION MODE CHECK
MULTI COMMANDER
OPERATION SYSTEM OFF SET UP
MULTI CONTROL COMMANDER
PRE-PROGRAMMED AND LEARNING
manuals search engine
VSX-607RDS, VSX-407RDS
6 MULTI CONTROL function buttons
Used to set and operate the MULTI CONTROL, and
switch the function.
TV CONTROL: Press to operate TV.
7 SURROUND button
Press when performing surround operations.
8 Number/surround setting buttons
[When set to SURROUND (OPERATIONS)]
PRO LOGIC: Switches the DOLBY PRO LOGIC.
DSP MODE: Switches the surround effects.
VIRTUAL: Turns the DOLBY VIRTUAL ON/OFF.
5.1CH: Use to set the DVD 5.1-channel input mode.
CENTER –, +: Adjusts the center level.
REAR –, +: Adjusts the rear (surround) level.
TEST TONE: When turned ON (while in DOLBY PRO
LOGIC or DVD 5.1-channel input mode), volume balance
adjustment signals are output in order from the speakers
and can be adjusted.
DIRECT: Use to playback sound without going through
the tone and balance control circuits. DOLBY PRO
LOGIC, DSP MODE, DOLBY VIRTUAL and LOUDNESS
also turn off.
LOUDNESS: When LOUDNESS is turned ON at a small
volume, the low frequency and high frequency levels
increase, enabling the sound to be easier to hear.
[Tuner Operations]
Number buttons: Use for setting the frequency value
when the station call is selected or during direct access.
CLASS: Switches the CLASS (A/B/C).
DISC: Use to set the Direct Access mode.
[VCR operations]
Number buttons: Use to select the channel of the TV
tuner in the VCR.
TV/VCR: Switches between TV/VCR.
[CD Operations]
DISC: Use to select the DISC number.
9 FUNCTION button
Switches the function.
0 MULTI OPERATION button
Use to operate the multi operation.
-
(Power) button
Turns ON/OFF the power of devices other than this unit.
= TV buttons
~ MODE CHECK button
! COMMANDER SET UP button
Use to control and learn operations of other manufacturers'
equipment, and set multi operation functions.
@ SYSTEM OFF button
Use to turn OFF the power of all equipment connected
to the main unit.
57